Plug in high quality electric cable termination for 110 KV
We are one of the leading factory in North China manufacturing wires and cables with over 20 years experiences. Our cables division has a very wide range of products, our competitive products are LV and HV XLPE Insulated Power Cables, PVC Insulated Power Cables, Low Smoke, Zero (Low)-Halogen Flame Retardant Cables, Coaxial Cables, Fireproof Cables, Aluminum Alloy Cables, Cabtyre Cables, Overhead Cables, Control Cables, Silicone Rubber Cables, Ribbon Cables, High and Low Temperature Corrosion Resistant Cables, Mineral Insulated Cables, Other special cables according to customer requirements and Cable Accessories.
- Ruiyang
- Shenyang
- 15 days
- 100 per month
- Information
- Download
型号Model | YJZGG | ||
额定电压 Rated voltage | 66kV | 110kV | 220kV |
最髙工作电压 Maximum working voltage | 72.5kV | 126kV | 252kV |
雷电冲击电压 Lightning impulse voltage | 450kV | 550kV | 1050kV |
长度(带延长杆) Length (with extension rod) | 310mm (583mm) | 470mm(757mm) | 620(960)mm |
计算重量(带延长杆) Calculated weight(with extension rod) | 28kg | 38kg(42kg) | 150(190)kg |
SF6工作压力SF6 working pressure | 0.2 ~ 0.6MPa | 0.2 ~ 0.6MPa | <=0.85MPa |
导体规格 Conductor specifications | 1600mm2 | 1600mm2 | 2500mm2 |
绝缘外径 scope Insulation outer diameter | <=82mm | <=84mm | 114mm |
执行标准 Execution standard | IEC60859 | GB/T11017 | GB/T18890 |
1. Assembly
The whole termination is composed of two parts: epoxy bushing and plug-in splice.
2. Premold
The equipment or cable lines can be repaired or maintained without breaking the seal between Pre-insxalled epoxy bushing and the equipment.
3. Cone
The silicone rubber stress cone provides the electric stress control.Prefabricated silicone rubber stress cone is subject to 100% delivery inspection
4. Springs
The connectors with multipoint contact springs are used to provide good contact with conductors.The metal spring pressure device can ensure that the stress cone is always closely attached to the inner wall of the matched epoxy bushing and the interfacial pressure is ensured.
5.Install
The cable fixing and sealing device of the Termination will be connected with the outer sheath of the cable to play the role of fixing and mechanical protection, which can provide a separate grounding.No special tools or brazing are required for termination installation.The bottom flange and the termination can be grounded separately.Dry type interface, no oil
6.Replace
When it is necessary to replace the old oil-filled Termination installed in the transformer or oil-filled insulated switchgear, the extension rod and fixing ring can be selected to match the Termination outgoing line position.
7.Specification
Size: IEC62271 -209、GB/T22381、IEC60859
Test: GB/T 18890、GB/T11017
